akYtec was founded in 2010 by experienced and highly qualified specialists from the fields of electronics development and automation technology. The company focuses on developing and distributing industrial automation technology, such as controllers with integrated touch screens. Integrating external technology and manufacturing partners allows akYtec to adapt flexibly to customer needs at any time. akYtec brings together key technologies and know-how to develop products.
Programmable Logic Controller
PR200 Series
Two sets of RS485, Master & Slave
Built-in LCD display screen：can display
two lines, 16 characters each line
Max. support：8DI + 8DO + 4AI + 2AO and 2xRS485
Operating temperature：-20…+55 ºС
-
Built-in Real Time Clock, two sets of programmable LED indicators
-
Optional 24VDC or 230VAC version, None or 1 or 2 sets of RS485
-
Resistor type (PTC/KTY thermistor Pt1000)
-
Support RS485 Master/Slave
-
Analog input supports 4...20mA / 0...10V
-
Programming via built-in mini USB portUse standard FBD programming language
-
Support RPM expansion module
PR100 / PR102 Mini PLC
PR100 with 20 I/Os：8DI + 8DO + 4AI
PR102 with 40 I/Os：16DI + 14DO + 8AI + 2AO
Supply voltage：24VDC
Analog input support：4...20mA / 0...10V
Operating temperature：-40…+55 ºС
-
PR102 built-in two RS485 ports and supports RS485 Master/Slave
-
Built-in Real Time Clock
-
Resistor type (PTC/KTY thermistor Pt1000)
-
PR102 I/O can be extended by PRM expansion module
-
Programming via built-in mini USB port, use standard FBD programming language
-
Compact design of PR100 only 90mm wide
PR103 built-in Ethernet mini PLC
Two sets of RS485 + Ethernet
Support 26 I/O：6DI + 4 Hi Speed DI (100KHz), 8DO + 6AI + 2AO
Supply voltage：24VDC
Operating temperature：-40…+55 ºС
-
Built-in two sets of RS485
-
Support RS485 Master/Slave
-
Built-in Real Time Clock
-
Analog input supports 4...20mA/0...10V
RTD sensors (Pt500/1000/Ni500/1000...etc.)
NTC/PTC sensors
-
I/O can be extended by PRM expansion module
-
Programming via built-in mini USB port, using
-
standard FBD programming language
SMI200
Only one ø 22.5 mm hole is required
for installation
Built-in LCD display screen：can display two lines, 16 characters each line
Supply voltage：24VDC
Operating temperature：-20…+55 ºС
-
No built-in I/O, needs to be used with I/O modules
-
Body aperture ø 22.5 mm
-
Programming via built-in mini USB port, using standard FBD programming language
-
Can be used with I/O modules of various brands through RS485
-
Support RS485 Master/Slave
-
Built-in Real Time Clock
-
Front panel protection level IP54
I/O Modules
MU1xx remote I/O
RS485 Modbus remote I/O
-
Up to 16DI / 16DO (support PWM output), 8AI / 8AO
-
Various digital/analog inputs and outputs
-
RS485 network status diagnosis
-
Support Modbus RTU communication protocol
-
Can be used as an I/O interface for SCADA system or HMI
-
When a comm. error occurs, the output is forced to a fail-safe state
-
DI/DO with logic function
-
Automatic detection of transport protocols
-
DIN rail or wall mounting
-
Free configuration tools
MU2xx remote I/O
Ethernet remote I/O, with data logging function
Supports the comm. protocols：Modbus TCP, MQTT, SNMP, SNTP
-
A single module can support up to 32DI (supports NPN/PNP input 100KHz high-speed counter)
-
2 Ethernet Ports (support LAN bypass)
-
16DO (support PWM output)
-
Various digital/analog inputs and outputs
-
8AI / 8AO
-
Network status diagnosis
-
Daisy chain topology wiring, alarm signals, RTC / Data logging
-
Group settings for multiple modules
-
Free configuration tools
Digital Display
ITP14 analog signal display
Only a Ø22.5mm hole is needed for installation
Analog input：0-10V, 4-20mA
Display range：-999 … 9999
Supply voltage：24VDC
Optional for two colors: Red or Green
<built-in>
- ON/OFF control of NPN output
- Square root function (for special sensors)
- Digital filter
- Alarm function (flashes when set point is
exceeded)
- Error indication when measurement limits
are exceeded, wire breakage, short circuit
- Linear signal scaling function
-
Ø22.5mm body designed for easy installation
-
Measure and display process values
-
Accuracy ±0.2%
-
Adjustable decimal point position
-
IP65
ITP15 analog signal display
Only a Ø22.5mm hole is needed for installation
Analog input：0/2-10V, 0-5mA, 0/4-20mA
Display range：0...100%
Supply voltage：24VDC
<built-in>
- ON/OFF control of NPN output
- 2 flash modes (fast/slow)
- Alert settings
-
Ø22.5mm body designed for easy installation
-
Bar graph indicates measured value
-
10 double color bars (green/red), 10% each
-
IP65
ITP16 temperature signal display
Only a Ø22.5mm hole is needed for installation
<Temperature input>
RTD：Pt50/Pt100/Pt100...etc.
NTC：J, K, N, T, S...etc.
Accuracy：±0.2%
Display range：-999…9999
Supply voltage：24VDC
Optional for two colors：Red or Green
<built-in>
- ON/OFF control of NPN output
- Square root function (for special sensors)
- Digital filter
- Alarm function (flashes when set point is
exceeded)
- Error indication when measurement limits
are exceeded, wire breakage, short circuit
- Linear signal scaling function
-
Ø22.5mm body designed for easy installation
-
Adjustable decimal point position
-
Measure and display process values
-
IP65
SMI2 RS485 digital display
Only a Ø22.5mm hole is needed for installation
Supported variable types：int, word, float, string
Support：Modbus RTU / ASCII
Supply voltage：24VDC
Optional for two colors：Red or Green
-
Ø22.5mm body designed for easy installation
-
Can be used as Modbus master or slave to display RS485 value from the network
-
Display alerts for values outside a specified range
-
IP65
Transmitter
Data Logger
